BS EN ISO 4674-1:2016 BSl Standards Publication Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods bsi. BS EN ISO 4674-1:2016 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN ISO withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCl/69,Footwear, leather and coated fabrics. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN978 0580854736 ICS 59.080.40 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016. Amendments/Corrigenda issued sincepublication Date Text affected EN IS0 4674-1 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM November 2016 ,Version correct as of 28/02/2017 ICS59.080.40 Supersedes ENIS04674-1:2003 EnglishVersion Rubber-orplastics-coated fabrics -Determination oftear resistance - Part 1: Constant rate of tear methods (IsO 4674-1:2016) Supports textiles revetus de caoutchouc ou de Mit Kautschuk oder Kunststoff beschichtete Textilien - plastique - Détermination de la resistance au Bestimmung der Weiterreifsfestigkeit - Teil 1: dechirement - Partie 1: Methodes a vitesse constante Verfahren mit konstanter Geschwindigkeit (IS0 4674- de dechirement (IS0 4674-1:2016) 1:2016) This European Standard was approved by CEN on 2 October 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITE EUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG CEN-CENELECManagementCentre:AvenueMarnix17,B-1000Brussels @2016CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 4674-1:2016 E worldwide for CEN national Members.